How do you UDP multicast in Python?

Question

How do you send and receive UDP multicast in Python? Is there a standard library to do so?

Answer 1

This works for me:

Receive

import socket
import struct

MCAST_GRP = '224.1.1.1'
MCAST_PORT = 5007
IS_ALL_GROUPS = True

sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
if IS_ALL_GROUPS:
    # on this port, receives ALL multicast groups
    sock.bind(('', MCAST_PORT))
else:
    # on this port, listen ONLY to MCAST_GRP
    sock.bind((MCAST_GRP, MCAST_PORT))
mreq = struct.pack("4sl", socket.inet_aton(MCAST_GRP), socket.INADDR_ANY)

sock.setsockopt(socket.IPPROTO_IP, socket.IP_ADD_MEMBERSHIP, mreq)

while True:
  # For Python 3, change next line to "print(sock.recv(10240))"
  print sock.recv(10240)

Send

import socket

MCAST_GRP = '224.1.1.1'
MCAST_PORT = 5007
# regarding socket.IP_MULTICAST_TTL
# ---------------------------------
# for all packets sent, after two hops on the network the packet will not 
# be re-sent/broadcast (see https://www.tldp.org/HOWTO/Multicast-HOWTO-6.html)
MULTICAST_TTL = 2

sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
sock.setsockopt(socket.IPPROTO_IP, socket.IP_MULTICAST_TTL, MULTICAST_TTL)

# For Python 3, change next line to 'sock.sendto(b"robot", ...' to avoid the
# "bytes-like object is required" msg (https://stackoverflow.com/a/42612820)
sock.sendto("robot", (MCAST_GRP, MCAST_PORT))

It is based off the examples from http://wiki.python.org/moin/UdpCommunication which didn't work.

My system is... Linux 2.6.31-15-generic #50-Ubuntu SMP Tue Nov 10 14:54:29 UTC 2009 i686 GNU/Linux Python 2.6.4

Answer 2

Multicast sender that broadcasts to a multicast group:

#!/usr/bin/env python

import socket
import struct

def main():
  MCAST_GRP = '224.1.1.1'
  MCAST_PORT = 5007
  sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
  sock.setsockopt(socket.IPPROTO_IP, socket.IP_MULTICAST_TTL, 32)
  sock.sendto('Hello World!', (MCAST_GRP, MCAST_PORT))

if __name__ == '__main__':
  main()

Multicast receiver that reads from a multicast group and prints hex data to the console:

#!/usr/bin/env python

import socket
import binascii

def main():
  MCAST_GRP = '224.1.1.1' 
  MCAST_PORT = 5007
  sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
  try:
    sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
  except AttributeError:
    pass
  sock.setsockopt(socket.IPPROTO_IP, socket.IP_MULTICAST_TTL, 32) 
  sock.setsockopt(socket.IPPROTO_IP, socket.IP_MULTICAST_LOOP, 1)

  sock.bind((MCAST_GRP, MCAST_PORT))
  host = socket.gethostbyname(socket.gethostname())
  sock.setsockopt(socket.SOL_IP, socket.IP_MULTICAST_IF, socket.inet_aton(host))
  sock.setsockopt(socket.SOL_IP, socket.IP_ADD_MEMBERSHIP, 
                   socket.inet_aton(MCAST_GRP) + socket.inet_aton(host))

  while 1:
    try:
      data, addr = sock.recvfrom(1024)
    except socket.error, e:
      print 'Expection'
      hexdata = binascii.hexlify(data)
      print 'Data = %s' % hexdata

if __name__ == '__main__':
  main()

Answer 3

Better use:

sock.bind((MCAST_GRP, MCAST_PORT))

instead of:

sock.bind(('', MCAST_PORT))

because, if you want to listen to multiple multicast groups on the same port, you'll get all messages on all listeners.

Answer 4

In order to Join multicast group Python uses native OS socket interface. Due to portability and stability of Python environment many of socket options are directly forwarded to native socket setsockopt call. Multicast mode of operation such as joining and dropping group membership can be accomplished by setsockopt only.

Basic program for receiving multicast IP packet can look like:

from socket import *

multicast_port  = 55555
multicast_group = "224.1.1.1"
interface_ip    = "10.11.1.43"

s = socket(AF_INET, SOCK_DGRAM )
s.bind(("", multicast_port ))
mreq = inet_aton(multicast_group) + inet_aton(interface_ip)
s.setsockopt(IPPROTO_IP, IP_ADD_MEMBERSHIP, str(mreq))

while 1:
    print s.recv(1500)

Firstly it creates socket, binds it and triggers triggers multicast group joining by issuing setsockopt. At very end it receives packets forever.

Sending multicast IP frames is straight forward. If you have single NIC in your system sending such packets does not differ from usual UDP frames sending. All you need to take care of is just set correct destination IP address in sendto() method.

I noticed that lot of examples around Internet works by accident in fact. Even on official python documentation. Issue for all of them are using struct.pack incorrectly. Please be advised that typical example uses 4sl as format and it is not aligned with actual OS socket interface structure.

I will try to describe what happens underneath the hood when exercising setsockopt call for python socket object.

Python forwards setsockopt method call to native C socket interface. Linux socket documentation (see man 7 ip) introduces two forms of ip_mreqn structure for IP_ADD_MEMBERSHIP option. Shortest is form is 8 bytes long and longer is 12 bytes long. Above example generates 8 byte setsockopt call where first four bytes define multicast_group and second four bytes define interface_ip.

Answer 5

Have a look at py-multicast. Network module can check if an interface supports multicast (on Linux at least).

import multicast
from multicast import network

receiver = multicast.MulticastUDPReceiver ("eth0", "238.0.0.1", 1234 )
data = receiver.read()
receiver.close()

config = network.ifconfig()
print config['eth0'].addresses
# ['10.0.0.1']
print config['eth0'].multicast
#True - eth0 supports multicast
print config['eth0'].up
#True - eth0 is up

Perhaps problems with not seeing IGMP, were caused by an interface not supporting multicast?

Answer 6

Just another answer to explain some subtle points in the code of the other answers:

• socket.INADDR_ANY - (Edited) In the context of IP_ADD_MEMBERSHIP, this doesn't really bind the socket to all interfaces but just choose the default interface where multicast is up (according to routing table)
• Joining a multicast group isn't the same as binding a socket to a local interface address

see What does it mean to bind a multicast (UDP) socket? for more on how multicast works

Multicast receiver:

import socket
import struct
import argparse


def run(groups, port, iface=None, bind_group=None):
    # generally speaking you want to bind to one of the groups you joined in
    # this script,
    # but it is also possible to bind to group which is added by some other
    # programs (like another python program instance of this)

    # assert bind_group in groups + [None], \
    #     'bind group not in groups to join'
    sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)

    # allow reuse of socket (to allow another instance of python running this
    # script binding to the same ip/port)
    sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)

    sock.bind(('' if bind_group is None else bind_group, port))
    for group in groups:
        mreq = struct.pack(
            '4sl' if iface is None else '4s4s',
            socket.inet_aton(group),
            socket.INADDR_ANY if iface is None else socket.inet_aton(iface))

        sock.setsockopt(socket.IPPROTO_IP, socket.IP_ADD_MEMBERSHIP, mreq)

    while True:
        print(sock.recv(10240))


if __name__ == '__main__':
    parser = argparse.ArgumentParser()
    parser.add_argument('--port', type=int, default=19900)
    parser.add_argument('--join-mcast-groups', default=[], nargs='*',
                        help='multicast groups (ip addrs) to listen to join')
    parser.add_argument(
        '--iface', default=None,
        help='local interface to use for listening to multicast data; '
        'if unspecified, any interface would be chosen')
    parser.add_argument(
        '--bind-group', default=None,
        help='multicast groups (ip addrs) to bind to for the udp socket; '
        'should be one of the multicast groups joined globally '
        '(not necessarily joined in this python program) '
        'in the interface specified by --iface. '
        'If unspecified, bind to 0.0.0.0 '
        '(all addresses (all multicast addresses) of that interface)')
    args = parser.parse_args()
    run(args.join_mcast_groups, args.port, args.iface, args.bind_group)

sample usage: (run the below in two consoles and choose your own --iface (must be same as the interface that receives the multicast data))

python3 multicast_recv.py --iface='192.168.56.102' --join-mcast-groups '224.1.1.1' '224.1.1.2' '224.1.1.3' --bind-group '224.1.1.2'

python3 multicast_recv.py --iface='192.168.56.102' --join-mcast-groups '224.1.1.4'

Multicast sender:

import socket
import argparse


def run(group, port):
    MULTICAST_TTL = 20
    sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
    sock.setsockopt(socket.IPPROTO_IP, socket.IP_MULTICAST_TTL, MULTICAST_TTL)
    sock.sendto(b'from multicast_send.py: ' +
                f'group: {group}, port: {port}'.encode(), (group, port))


if __name__ == '__main__':
    parser = argparse.ArgumentParser()
    parser.add_argument('--mcast-group', default='224.1.1.1')
    parser.add_argument('--port', default=19900)
    args = parser.parse_args()
    run(args.mcast_group, args.port)

sample usage: # assume the receiver binds to the below multicast group address and that some program requests to join that group. And to simplify the case, assume the receiver and the sender are under the same subnet

python3 multicast_send.py --mcast-group '224.1.1.2'

python3 multicast_send.py --mcast-group '224.1.1.4'

Answer 7

To make the client code (from tolomea) work on Solaris you need to pass the ttl value for the IP_MULTICAST_TTL socket option as an unsigned char. Otherwise you will get an error. This worked for me on Solaris 10 and 11:

import socket
import struct

MCAST_GRP = '224.1.1.1'
MCAST_PORT = 5007
ttl = struct.pack('B', 2)

sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
sock.setsockopt(socket.IPPROTO_IP, socket.IP_MULTICAST_TTL, ttl)
sock.sendto("robot", (MCAST_GRP, MCAST_PORT))

Answer 8

This example doesn't work for me, for an obscure reason.

Not obscure, it's simple routing.

On OpenBSD

route add -inet 224.0.0.0/4 224.0.0.1

You can set the route to a dev on Linux

route add -net 224.0.0.0 netmask 240.0.0.0 dev wlp2s0

force all multicast traffic to one interface on Linux

   ifconfig wlp2s0 allmulti

tcpdump is super simple

tcpdump -n multicast

In your code you have:

while True:
  # For Python 3, change next line to "print(sock.recv(10240))"

Why 10240?

multicast packet size should be 1316 bytes

Answer 9

tolomea's answer worked for me. I hacked it into socketserver.UDPServer too:

class ThreadedMulticastServer(socketserver.ThreadingMixIn, socketserver.UDPServer):
    def __init__(self, *args):
        super().__init__(*args)
        self.socket = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP)
        self.socket.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
        self.socket.bind((MCAST_GRP, MCAST_PORT))
        mreq = struct.pack('4sl', socket.inet_aton(MCAST_GRP), socket.INADDR_ANY)
        self.socket.setsockopt(socket.IPPROTO_IP, socket.IP_ADD_MEMBERSHIP, mreq)