This is probably a rather peculiar question. I am using Spring Boot 2.0.2 with the default Tomcat container. In order to set up a test in our QA environment that simulates many servers, I would like to set up a Spring Boot-based REST service that listens on a very large number of ports simultaneously. I'm able to do this using the technique previously described in in another SO post (Configure Spring Boot with two ports) which basically adds connectors using TomcatServletWebServerFactory.addAdditionalTomcatConnectors().
The difficulty is that a large number of threads seem to be created for each additional port activated; some empirical measurements show the total to be 17 + (15 * number of ports). This means listening on 250 ports result in 3767 threads created and 500 ports result in 7517 threads created and I would like to go somewhat beyond that number. The test program used to take the above measurements is the bare minimum to bring up a Spring service and there is no code that creates threads explicitly so insofar, as I know, all of those threads were created by Spring/Tomcat.
Is there a way to accomplish this using Spring that doesn't use so many threads per active port? Would an alternate container like Jetty be more efficient?
