We have a batch job that runs every day and copies a file to a pickup folder. I want to also take a copy of that file and drop it into an archive folder with the filename
yyyy-MM-dd.log
What's the easiest way to do this in a Windows batch job?
I'm basically looking for an equivalent of this Unix command:
cp source.log `date +%F`.log
CP source.log %DATE:~-4%-%DATE:~4,2%-%DATE:~7,2%.log
But it's locale dependent. I'm not sure if %DATE% is localized, or depends on the format specified for the short date in Windows.
Here is a locale-independent way to extract the current date from this answer, but it depends on WMIC and FOR /F:
FOR /F %%A IN ('WMIC OS GET LocalDateTime ^| FINDSTR \.') DO @SET B=%%A
CP source.log %B:~0,4%-%B:~4,2%-%B:~6,2%.log
This worked for me and was a filename-safe solution (though it generates a MM-dd-YYYY format):
C:\ set SAVESTAMP=%DATE:/=-%@%TIME::=-%
C:\ set SAVESTAMP=%SAVESTAMP: =%
C:\ set SAVESTAMP=%SAVESTAMP:,=.%.jpg
C:\ echo %SAVESTAMP%
11-04-2012@20-52-42.79.jpg
The first command takes a DATE and replaces / with -, takes the TIME and replaces : with -, and combines them into DATE@TIME format. The second set statement removes any spaces, and the third set replaces , with . and appends the .jpg extension.
The above code is used in a little script that pulls images from a security IP Camera for further processing:
:while
set SAVESTAMP=%DATE:/=-%@%TIME::=-%
set SAVESTAMP=%SAVESTAMP: =%
set SAVESTAMP=%SAVESTAMP:,=.%.jpg
wget-1.10.2.exe --tries=0 -O %SAVESTAMP% http://admin:<password>@<ip address>:<port>/snapshot.cgi
timeout 1
GOTO while
For French Locale (France) ONLY, be careful because / appears in the date :
echo %DATE%
08/09/2013
For our problem of log file, here is my proposal for French Locale ONLY:
SETLOCAL
set LOGFILE_DATE=%DATE:~6,4%.%DATE:~3,2%.%DATE:~0,2%
set LOGFILE_TIME=%TIME:~0,2%.%TIME:~3,2%
set LOGFILE=log-%LOGFILE_DATE%-%LOGFILE_TIME%.txt
rem log-2014.05.19-22.18.txt
command > %LOGFILE%
Here is a locale independent solution (copy to a file named SetDateTimeComponents.cmd):
@echo off
REM This script taken from the following URL:
REM http://www.winnetmag.com/windowsscripting/article/articleid/9177/windowsscripting_9177.html
REM Create the date and time elements.
for /f "tokens=1-7 delims=:/-, " %%i in ('echo exit^|cmd /q /k"prompt $d $t"') do (
for /f "tokens=2-4 delims=/-,() skip=1" %%a in ('echo.^|date') do (
set dow=%%i
set %%a=%%j
set %%b=%%k
set %%c=%%l
set hh=%%m
set min=%%n
set ss=%%o
)
)
REM Let's see the result.
echo %dow% %yy%-%mm%-%dd% @ %hh%:%min%:%ss%
I put all my .cmd scripts into the same folder (%SCRIPTROOT%); any script that needs date/time values will call SetDateTimeComponents.cmd as in the following example:
setlocal
@echo Initializing...
set SCRIPTROOT=%~dp0
set ERRLOG=C:\Oopsies.err
:: Log start time
call "%SCRIPTROOT%\SetDateTimeComponents.cmd" >nul
@echo === %dow% %yy%-%mm%-%dd% @ %hh%:%min%:%ss% : Start === >> %ERRLOG%
:: Perform some long running action and log errors to ERRLOG.
:: Log end time
call "%SCRIPTROOT%\SetDateTimeComponents.cmd" >nul
@echo === %dow% %yy%-%mm%-%dd% @ %hh%:%min%:%ss% : End === >> %ERRLOG%
As the example shows, you can call SetDateTimeComponents.cmd whenever you need to update the date/time values. Hiding the time parsing script in it's own SetDateTimeComponents.cmd file is a nice way to hide the ugly details, and, more importantly, avoid typos.
Because the idea of tearing %DATE% and %TIME% apart and mashing them back together seems fragile at best, here's an alternative that uses a powershell oneliner:
for /f %i in ('powershell -c "get-date -format yyyy-MM-dd--HH-mm-ss"') do @set DATETIME=%i
set LOGFILE=my-script-%DATETIME%.txt
Reference for get-date is here, with format options for both .NET-style and UNIX-style.
I frequently use this, and put everything into a single copy command. The following copies example.txt as example_YYYYMMDD_HHMMSS.txt and of course you can modify it to suit your preferred format. The quotes are only necessary if there are any spaces in the filespec. If you want to reuse the exact same date/timestamp, you'd need to store it in a variable.
copy "{path}\example.txt" "{path}\_%date:~10,4%%date:~4,2%%date:~7,2%_%time:~0,2%%time:~3,2%%time:~6,2%.txt"
This will ensure that the output is a 2-digit value...you can rearrange the output to your liking and test by un-commenting the diagnostics section. Enjoy!
(I borrowed a lot of this from other forums...)
:: ------------------ Date and Time Modifier ------------------------
@echo off
setlocal
:: THIS CODE WILL DISPLAY A 2-DIGIT TIMESTAMP FOR USE IN APPENDING FILENAMES
:: CREATE VARIABLE %TIMESTAMP%
for /f "tokens=1-8 delims=.:/-, " %%i in ('echo exit^|cmd /q /k"prompt $D $T"') do (
for /f "tokens=2-4 skip=1 delims=/-,()" %%a in ('echo.^|date') do (
set dow=%%i
set %%a=%%j
set %%b=%%k
set %%c=%%l
set hh=%%m
set min=%%n
set sec=%%o
set hsec=%%p
)
)
:: ensure that hour is always 2 digits
if %hh%==0 set hh=00
if %hh%==1 set hh=01
if %hh%==2 set hh=02
if %hh%==3 set hh=03
if %hh%==4 set hh=04
if %hh%==5 set hh=05
if %hh%==6 set hh=06
if %hh%==7 set hh=07
if %hh%==8 set hh=08
if %hh%==9 set hh=09
:: --------- TIME STAMP DIAGNOSTICS -------------------------
:: Un-comment these lines to test output
:: echo dayOfWeek = %dow%
:: echo year = %yy%
:: echo month = %mm%
:: echo day = %dd%
:: echo hour = %hh%
:: echo minute = %min%
:: echo second = %sec%
:: echo hundredthsSecond = %hsec%
:: echo.
:: echo Hello!
:: echo Today is %dow%, %mm%/%dd%.
:: echo.
:: echo.
:: echo.
:: echo.
:: pause
:: --------- END TIME STAMP DIAGNOSTICS ----------------------
:: assign timeStamp:
:: Add the date and time parameters as necessary - " yy-mm-dd-dow-min-sec-hsec "
endlocal & set timeStamp=%yy%%mm%%dd%_%hh%-%min%-%sec%
echo %timeStamp%
Maybe this can help:
echo off
@prompt set date=$d$_ set time=$t$h$h$h
echo some log >> %date% %time%.log
exit
or
echo off
set v=%date%.log
echo some log >> %v%
Create a file with the current date as filename (ex. 2008-11-08.dat)
echo hello > %date%.dat
With the current date but without the "-" (ex. 20081108.dat)
echo hello > %date:-=%.dat
I put together a little C program to print out the current timestamp (locale-safe, no bad characters...). Then, I use the FOR command to save the result in an environment variable:
:: Get the timestamp
for /f %%x in ('@timestamp') do set TIMESTAMP=%%x
:: Use it to generate a filename
for /r %%x in (.\processed\*) do move "%%~x" ".\archived\%%~nx-%TIMESTAMP%%%~xx"
Here's a link:
I know this thread is old but I just want to add this here because it helped me alot trying to figure this all out and its clean. The nice thing about this is you could put it in a loop for a batch file that's always running. Server up-time log or something. That's what I use it for anyways. I hope this helps someone someday.
@setlocal enableextensions enabledelayedexpansion
@echo off
call :timestamp freshtime freshdate
echo %freshdate% - %freshtime% - Some data >> "%freshdate - Somelog.log"
:timestamp
set hour=%time:~0,2%
if "%hour:~0,1%" == " " set hour=0%hour:~1,1%
set min=%time:~3,2%
if "%min:~0,1%" == " " set min=0%min:~1,1%
set secs=%time:~6,2%
if "%secs:~0,1%" == " " set secs=0%secs:~1,1%
set FreshTime=%hour%:%min%:%secs%
set year=%date:~-4%
set month=%date:~4,2%
if "%month:~0,1%" == " " set month=0%month:~1,1%
set day=%date:~7,2%
if "%day:~0,1%" == " " set day=0%day:~1,1%
set FreshDate=%month%.%day%.%year%
You can simply detect the current local format and can get the date in your format, for example:
::for 30.10.2016 dd.MM.yyyy
if %date:~2,1%==. set d=%date:~-4%%date:~3,2%%date:~,2%
::for 10/30/2016 MM/dd/yyyy
if %date:~2,1%==/ set d=%date:~-4%%date:~,2%%date:~3,2%
::for 2016-10-30 yyyy-MM-dd
if %date:~4,1%==- set d=%date:~,4%%date:~5,2%%date:~-2%
::variable %d% have now value: 2016103 (yyyyMMdd)
set t=%time::=%
set t=%t:,=%
::variable %t% have now time without delimiters
cp source.log %d%_%t%.log
I know this is an old post, but there is a FAR simpler answer (though maybe it only works in newer versions of windows). Just use the /t parameter for the DATE and TIME dos commands to only show the date or time and not prompt you to set it, like this:
@echo off
echo Starting test batch file > testlog.txt
date /t >> testlog.txt
time /t >> testlog.txt
1) You can download GNU coreutils which comes with GNU date
2) you can use VBScript, which makes date manipulation easier in Windows:
Set objFS = CreateObject("Scripting.FileSystemObject")
strFolder = "c:\test"
Set objFolder = objFS.GetFolder(strFolder)
current = Now
mth = Month(current)
d = Day(current)
yr = Year(current)
If Len(mth) <2 Then
mth="0"&mth
End If
If Len(d) < 2 Then
d = "0"&d
End If
timestamp=yr & "-" & mth &"-"& d
For Each strFile In objFolder.Files
strFileName = strFile.Name
If InStr(strFileName,"file_name_here") > 0 Then
BaseName = objFS.GetBaseName(strFileName)
Extension = objFS.GetExtensionName(strFileName)
NewName = BaseName & "-" & timestamp & "." & Extension
strFile.Name = NewName
End If
Next
Run the script as:
c:\test> cscript /nologo myscript.vbs
This works well with (my) German locale, should be possible to adjust it to your needs...
forfiles /p *PATH* /m *filepattern* /c "cmd /c ren @file
%DATE:~6,4%%DATE:~3,2%%DATE:~0,2%_@file"
For big zip files for deployment, I use quarter hours. No one else on this page had mentioned it before, so I'll put my small script here:
set /a "quarter_hours=%time:~0,2%*4 + %time:~3,2% / 15"
set "zip_file=release_%DATE:~-4%.%DATE:~4,2%.%DATE:~7,2%.%quarter_hours%.zip"
It doesn't zero pad quarter hours from midnight to 5am yet, but it still makes it so you can have a stamped release multiple times a day with few collisions.
Hope that helps.
used Martin's suggestion with a little tweak to add time stamp to the file name:
forfiles /p [foldername] /m rsync2.log /c "cmd /c ren @file %DATE:~6,4%%DATE:~3,2%%DATE:~0,2%_%time:~-11,2%-%time:~-8,2%-%time:~-5,2%-@file
For the 10:17:21 23/10/2019 The result is:
20191023_10-17-21-rsync2.log
