Plank (wood)

A plank is timber that is flat, elongated, and rectangular with parallel faces that are higher and longer than wide. Used primarily in carpentry, planks are critical in the construction of ships, houses, bridges, and many other structures.[1] Planks also serve as supports to form shelves and tables.

Cutting a log into planks in a sawmill
A plank used in the repair of a ship

Usually made from sawed timber, planks are usually more than 1+12 in (38 mm) thick, and are generally wider than 2+12 in (64 mm). In the United States, planks can be any length and are generally a minimum of 2 in (51 mm) deep by 8 in (200 mm) wide, but planks that are 2 in (51 mm) by 10 in (250 mm) and 2 in (51 mm) by 12 in (300 mm) are more commonly stocked by lumber retailers. Planks are often used as a work surface on elevated scaffolding, and need to be wide enough to provide strength without breaking when walked on. The wood is categorized as a board if its width is less than 2+12 in (64 mm), and its thickness is less than 1+12 in (38 mm).

A plank used in a building as a horizontal supporting member that runs between foundations, walls, or beams to support a ceiling or floor is called a joist.

The plank was the basis of maritime transport: wood floats on water, and abundant forests meant wooden logs could be easily obtained and processed, making planks the primary material in ship building. However, since the 20th century, wood has largely been supplanted in ship construction by iron and steel, to decrease cost and improve durability.[2]


A plank that covers a third rail as a protection for those who fall off a platform

See also


  1. Karen Bush Gibson (1 January 2005). Plank Houses. Capstone Press. pp. 5–. ISBN 978-0-7368-3725-5. Retrieved 28 January 2011.
  2. "Iron and steel in ships". New South Wales Office of Environment and Heritage. Retrieved 24 November 2013.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.